Call Us: 1-406-755-0805

Toll Free: 877-349-2327

Northwest Equipment Sales and Manufacturing

 
 
  •  

    Nylon Mount/Demount Head Kit w/Round Hole for Hofmann, Bear, & Sice Tire Changer

    Nylon Mount / Demount Head Kit with Round Hole.  Use with Hofmann (all earlier models except Hofmann 1550, 1620 and 1625), Bear TC 550, and Sice.  Complete "kit" includes hardware and bracket pictured.

     

    Colors may vary from those show.

     

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

    $58.00 USD
     
  •  

    Nylon Tire Mount/Demount Head (head only), Round Hole for Hofmann, Launch, Sice

    Nylon Mount / Demount Head (duckhead only) with Round Hole.  Use with Hofmann (all earlier models except Hofmann 1550, 1620 and 1625),Launch, BEAR model TC-550, and Sice. 

    This is a replacement nylon head only (no adapter bracket).  Requires adapter bracket for use included with our B50309 Mount/Demount Head Kit.

    Colors may vary from those shown.

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

    $59.90 USD
     
  •  

    Details about Nylon Mount Head Kit For Tire Changers, Accuturn, John Bean, Hofmann, SnapOn

    Nylon Mount/Demount Head Kit For Accuturn Early FMC, John Bean, Hofmann And Snap-On Tire Changers

     

    Use with Accuturn: 3602, 3602HP, 4260, 4560MR, 4602, 5602, 5602HP

    Hofmann:1520, 1565, 1620, 1625, 1625EM, 3300, 3300EM, Monty 1270, 2300, 3000, 300GP

     

    John Bean: EHP System IVE, IV, III, IIE

    Snap On model: All Models

     

    Complete "kit" includes nylon head and bracket pictured.

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

     

    $58.00 USD
     
  •  

    Nylon Mount/Demount Head for Accuturn-Hofmann-JBC-SnapOn Tire Changers

    Nylon Mount and Demount Head (head only, does not include bracket) for use with Accuturn, Hoffmann, John Bean, and Snap On.

    Listed specifically for the following makes / models of machines which already have the proper mounting bracket to attach the nylon head to:

    Replaces Accuturn OE part # 20024335 for models 3602 • 3602HP • 4260 • 4560MR • 4602 • 5602 • 5602 HP

    Replaces Hofmann OE part # 24335 for models 1520 • 1565 •1620 •1625 • 1625EM • 3300 • 3300EM • Monty 1270, 2300, 3000, 3000GP

    Replaces John Bean  OE part # 24335 for models  EHP System IVE • IV • III • IIE

    Replaces Snap On  OE part # 24335 for All Models

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

    $39.90 USD
     
  •  

    Nylon Mount/Demount Head for All Tool, Coats, Corghi Tire Changers

    Nylon Mount / Demount Head (duckhead only) with Round Hole.  Use with All Tool, Coats,Corghi. 

    This is a replacement nylon head only (no adapter bracket).  Requires adapter bracket for use included with our B50309 Mount/Demount Head Kit.

    Colors may vary from those shown.

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

    $49.90 USD
     
  •  

    Gray Nylon Low-Profile Tire Mount/Demount Head Kit for Coats Tire Changers

    Gray Nylon Low-Profile Tire Mount/Demount Head Kit
    for Coats Tire Changers Models:

     



    5030, 5040, 5050, 5060, 5065 
    6050, 6060, 6065

    7050, 7055, 7060, 7065, 7655, 7660, 7665

     

     

     

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

    $38.70 USD
     
  •  

    Nylon Mount and Demount Head for use with Hunter & Recent Accuturn Tire Changers

    Nylon mount and demount head, fits Hunter models TC250, TC300, TC325, and Accuturn  220A Tire Changers.  Will also fit other more recent Accuturn/Bosch models built by Sicam with an optional adapter bracket available from the manufacturer (not included).  Sicam built more recent Accuturn machine model numbers starting with the letter S. 

     

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

    Dimensions:  Small holes 5/16" diameter; 3 1/8" center to center.  Large center hole 1 1/8" diameter x 13/16" deep straight (non-tapered) blind hole does not go all the way through.

     

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

    $28.45 USD
     
  •  

    Plastic Inserts for Stainless Steel Duckhead for Coats Tire Changers

    Package of 12  Plastic Inserts for Coats Stainless Steel Duckhead Tire Mount

    Fits Coats Tire Changers

    • 5030, 5040, 5050, 5060, 5065, 5070
    • 6050, 6060, 6065,
    • 7050, 7055, 7060, 7065, 7655, 7660, 7665

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

    $32.45 USD
     
  •  

    Nylon Tire Mount/Demount Head Kit w/Tapered Hole for Coats Tire Changers

    Nylon Mount / Demount Head Kit with Tapered Hole. 

    Use with Coats models
    5030, 5040, 5050, 5060 5065 
    6050, 6060, 6065, 7050, 7055
    7060, 7065, 7655, 7660, 7665

    Complete "kit" includes hardware and bracket pictured.

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

    $26.84 USD
     
  •  

    Motorcycle/ATV Adapters

    Fits all TX series tire changers.

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

    $189.00 USD
     

[ Previous Page / 1 / Next Page ]

  • Nylon Mount/Demount Head Kit w/Round Hole for Hofmann, Bear, & Sice Tire Changer

    $58.00 USD

    Nylon Mount / Demount Head Kit with Round Hole.  Use with Hofmann (all earlier models except Hofmann 1550, 1620 and 1625), Bear TC 550, and Sice.  Complete "kit" includes hardware and bracket pictured.

     

    Colors may vary from those show.

     

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

     
  • Nylon Tire Mount/Demount Head (head only), Round Hole for Hofmann, Launch, Sice

    $59.90 USD

    Nylon Mount / Demount Head (duckhead only) with Round Hole.  Use with Hofmann (all earlier models except Hofmann 1550, 1620 and 1625),Launch, BEAR model TC-550, and Sice. 

    This is a replacement nylon head only (no adapter bracket).  Requires adapter bracket for use included with our B50309 Mount/Demount Head Kit.

    Colors may vary from those shown.

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

     
  • Details about Nylon Mount Head Kit For Tire Changers, Accuturn, John Bean, Hofmann, SnapOn

    $58.00 USD

    Nylon Mount/Demount Head Kit For Accuturn Early FMC, John Bean, Hofmann And Snap-On Tire Changers

     

    Use with Accuturn: 3602, 3602HP, 4260, 4560MR, 4602, 5602, 5602HP

    Hofmann:1520, 1565, 1620, 1625, 1625EM, 3300, 3300EM, Monty 1270, 2300, 3000, 300GP

     

    John Bean: EHP System IVE, IV, III, IIE

    Snap On model: All Models

     

    Complete "kit" includes nylon head and bracket pictured.

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

     

     
  • Nylon Mount/Demount Head for Accuturn-Hofmann-JBC-SnapOn Tire Changers

    $39.90 USD

    Nylon Mount and Demount Head (head only, does not include bracket) for use with Accuturn, Hoffmann, John Bean, and Snap On.

    Listed specifically for the following makes / models of machines which already have the proper mounting bracket to attach the nylon head to:

    Replaces Accuturn OE part # 20024335 for models 3602 • 3602HP • 4260 • 4560MR • 4602 • 5602 • 5602 HP

    Replaces Hofmann OE part # 24335 for models 1520 • 1565 •1620 •1625 • 1625EM • 3300 • 3300EM • Monty 1270, 2300, 3000, 3000GP

    Replaces John Bean  OE part # 24335 for models  EHP System IVE • IV • III • IIE

    Replaces Snap On  OE part # 24335 for All Models

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

     
  • Nylon Mount/Demount Head for All Tool, Coats, Corghi Tire Changers

    $49.90 USD

    Nylon Mount / Demount Head (duckhead only) with Round Hole.  Use with All Tool, Coats,Corghi. 

    This is a replacement nylon head only (no adapter bracket).  Requires adapter bracket for use included with our B50309 Mount/Demount Head Kit.

    Colors may vary from those shown.

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

     
  • Gray Nylon Low-Profile Tire Mount/Demount Head Kit for Coats Tire Changers

    $38.70 USD

    Gray Nylon Low-Profile Tire Mount/Demount Head Kit
    for Coats Tire Changers Models:

     



    5030, 5040, 5050, 5060, 5065 
    6050, 6060, 6065

    7050, 7055, 7060, 7065, 7655, 7660, 7665

     

     

     

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

     
  • Nylon Mount and Demount Head for use with Hunter & Recent Accuturn Tire Changers

    $28.45 USD

    Nylon mount and demount head, fits Hunter models TC250, TC300, TC325, and Accuturn  220A Tire Changers.  Will also fit other more recent Accuturn/Bosch models built by Sicam with an optional adapter bracket available from the manufacturer (not included).  Sicam built more recent Accuturn machine model numbers starting with the letter S. 

     

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

    Dimensions:  Small holes 5/16" diameter; 3 1/8" center to center.  Large center hole 1 1/8" diameter x 13/16" deep straight (non-tapered) blind hole does not go all the way through.

     

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

     
  • Plastic Inserts for Stainless Steel Duckhead for Coats Tire Changers

    $32.45 USD

    Package of 12  Plastic Inserts for Coats Stainless Steel Duckhead Tire Mount

    Fits Coats Tire Changers

    • 5030, 5040, 5050, 5060, 5065, 5070
    • 6050, 6060, 6065,
    • 7050, 7055, 7060, 7065, 7655, 7660, 7665

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

     
  • Nylon Tire Mount/Demount Head Kit w/Tapered Hole for Coats Tire Changers

    $26.84 USD

    Nylon Mount / Demount Head Kit with Tapered Hole. 

    Use with Coats models
    5030, 5040, 5050, 5060 5065 
    6050, 6060, 6065, 7050, 7055
    7060, 7065, 7655, 7660, 7665

    Complete "kit" includes hardware and bracket pictured.

    Nylon heads must be used with light pressure against the wheel to prevent flexing and with plenty of tire lubrication, otherwise early head failure will result.  Proper use of nylon heads will protect expensive custom wheels from damage and will last for many uses, however they do wear with each and every use and are considered "consumables".

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

     
  • Motorcycle/ATV Adapters

    $189.00 USD

    Fits all TX series tire changers.

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

     
 

[ Previous Page / 1 / Next Page ]

This website is created and hosted by Website.com's Site Builder.