Call Us: 1-406-755-0805

Toll Free: 877-349-2327

Northwest Equipment Sales and Manufacturing

 
 
  •  

    Waste Oil Burner Gun - Auto Care USA Model WB450

    • Made in Montana, USA! Ask about trade in value for your old one.

    Replace your current Waste Oil Burner Gun with a new, more reliable one!  Many existing fuel oil or wood fired systems can be converted, we can help you with the details!  (Propane or natural gas systems generally are not able to handle burning waste oil and are not recommended for conversion).

     

    Designed and built with relability and ease of service in mind.  Other designs use old technology, electrical controls, and a preheater block that is always on. This cooks the oil and forms sludge in the oil passages.  These blocks are difficult to remove and clean, requiring several hours of service.

     

    Our Patent Pending design uses modern high-tech electronics with our exclusive circuitry, that does not heat the oil until a demand for heat is received.  Oil sludge buildup in the preheater is virtually eliminated.

     

    If the preheater block ever does require service, simply remove the blast tube. You will find easy access through a removable cover plate, for quick easy cleaning.  It takes about 20 minutes, if you ever find it necessary.  

     

    Our Auto Care USA model WB450 can be matched to your BTU requirements from 100K BTU to 500K BTU.  If you need a higher BTU output choose our model WB1000 which can produce up to 1 million BTU heat output.

     

    Here is a simple formula to get a rough idea of how much BTU output your space requires: 

     

    Space Length x Width x Average Ceiling Height = Cubic Feet x 3.5 = Approximate BTU Requirements (Assumes a reasonably well insulated space.)

     

    Here is a rough idea what size chimney will be required based on BTU output of the gun for proper draft: 

    • Up to 200K BTU 6"
    • 250-350K BTU 8"
    • 400-600K BTU 10"
    • 700-1000K BTU 12"

     

     A barometric pressure damper installed in the chimney is always recommended and helps prevent carbon monoxide from entering the building during windy "downdraft" conditions.  Depending on your system a draft inducer fan may also be required.  Contact us for more information.

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

    $1,995.00 USD
     
  •  

    Waste Oil Burner Gun - Auto Care USA Model WB1000

    • Made in Montana, USA! Ask about trade in value for your old one.

    Replace your current Waste Oil Burner Gun with a new, more reliable one!  Many existing fuel oil or wood fired systems can be converted, we can help you with the details!  (Propane or natural gas systems generally are not able to handle burning waste oil and are not recommended for conversion).

     

    Designed and built with relability and ease of service in mind.  Other designs use old technology, electrical controls, and a preheater block that is always on. This cooks the oil and forms sludge in the oil passages.  These blocks are difficult to remove and clean, requiring several hours of service.

     

    Our Patent Pending design uses modern high-tech electronics with our exclusive circuitry, that does not heat the oil until a demand for heat is received.  Oil sludge buildup in the preheater is virtually eliminated. 

     

    If the preheater block ever does require service, simply remove the blast tube. You will find easy access through a removable cover plate, for quick easy cleaning.  It takes about 20 minutes, if you ever find it necessary.

     

     

    Our Auto Care USA model WB1000 can be matched to your BTU requirements from 500K BTU to 1 Million BTU.  If you need a lower BTU output choose our model WB450 which can be matched to your BTU requirements from 100K BTU to 500K BTU.

     

    Here is a simple formula to get a rough idea of how much BTU output your space requires: 

     

    Space Length x Width x Average Ceiling Height = Cubic Feet x 3.5 = Approximate BTU Requirements (Assumes a reasonably well insulated space.)

     

    Here is a rough idea what size chimney will be required based on BTU output of the gun for proper draft: 

    • Up to 200K BTU 6"
    • 250-350K BTU 8"
    • 400-600K BTU 10"
    • 700-1000K BTU 12"

     

     A barometric pressure damper installed in the chimney is always recommended and helps prevent carbon monoxide from entering the building during windy "downdraft" conditions.  Depending on your system a draft inducer fan may also be required.  Contact us for more information.

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

    $2,895.00 USD
     

[ Previous Page / 1 / Next Page ]

  • Waste Oil Burner Gun - Auto Care USA Model WB450

    $1,995.00 USD
    • Made in Montana, USA! Ask about trade in value for your old one.

    Replace your current Waste Oil Burner Gun with a new, more reliable one!  Many existing fuel oil or wood fired systems can be converted, we can help you with the details!  (Propane or natural gas systems generally are not able to handle burning waste oil and are not recommended for conversion).

     

    Designed and built with relability and ease of service in mind.  Other designs use old technology, electrical controls, and a preheater block that is always on. This cooks the oil and forms sludge in the oil passages.  These blocks are difficult to remove and clean, requiring several hours of service.

     

    Our Patent Pending design uses modern high-tech electronics with our exclusive circuitry, that does not heat the oil until a demand for heat is received.  Oil sludge buildup in the preheater is virtually eliminated.

     

    If the preheater block ever does require service, simply remove the blast tube. You will find easy access through a removable cover plate, for quick easy cleaning.  It takes about 20 minutes, if you ever find it necessary.  

     

    Our Auto Care USA model WB450 can be matched to your BTU requirements from 100K BTU to 500K BTU.  If you need a higher BTU output choose our model WB1000 which can produce up to 1 million BTU heat output.

     

    Here is a simple formula to get a rough idea of how much BTU output your space requires: 

     

    Space Length x Width x Average Ceiling Height = Cubic Feet x 3.5 = Approximate BTU Requirements (Assumes a reasonably well insulated space.)

     

    Here is a rough idea what size chimney will be required based on BTU output of the gun for proper draft: 

    • Up to 200K BTU 6"
    • 250-350K BTU 8"
    • 400-600K BTU 10"
    • 700-1000K BTU 12"

     

     A barometric pressure damper installed in the chimney is always recommended and helps prevent carbon monoxide from entering the building during windy "downdraft" conditions.  Depending on your system a draft inducer fan may also be required.  Contact us for more information.

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

     
  • Waste Oil Burner Gun - Auto Care USA Model WB1000

    $2,895.00 USD
    • Made in Montana, USA! Ask about trade in value for your old one.

    Replace your current Waste Oil Burner Gun with a new, more reliable one!  Many existing fuel oil or wood fired systems can be converted, we can help you with the details!  (Propane or natural gas systems generally are not able to handle burning waste oil and are not recommended for conversion).

     

    Designed and built with relability and ease of service in mind.  Other designs use old technology, electrical controls, and a preheater block that is always on. This cooks the oil and forms sludge in the oil passages.  These blocks are difficult to remove and clean, requiring several hours of service.

     

    Our Patent Pending design uses modern high-tech electronics with our exclusive circuitry, that does not heat the oil until a demand for heat is received.  Oil sludge buildup in the preheater is virtually eliminated. 

     

    If the preheater block ever does require service, simply remove the blast tube. You will find easy access through a removable cover plate, for quick easy cleaning.  It takes about 20 minutes, if you ever find it necessary.

     

     

    Our Auto Care USA model WB1000 can be matched to your BTU requirements from 500K BTU to 1 Million BTU.  If you need a lower BTU output choose our model WB450 which can be matched to your BTU requirements from 100K BTU to 500K BTU.

     

    Here is a simple formula to get a rough idea of how much BTU output your space requires: 

     

    Space Length x Width x Average Ceiling Height = Cubic Feet x 3.5 = Approximate BTU Requirements (Assumes a reasonably well insulated space.)

     

    Here is a rough idea what size chimney will be required based on BTU output of the gun for proper draft: 

    • Up to 200K BTU 6"
    • 250-350K BTU 8"
    • 400-600K BTU 10"
    • 700-1000K BTU 12"

     

     A barometric pressure damper installed in the chimney is always recommended and helps prevent carbon monoxide from entering the building during windy "downdraft" conditions.  Depending on your system a draft inducer fan may also be required.  Contact us for more information.

     

    Listed prices are cash and carry unless otherwise stated. Shipping prices vary based on location. Only available in USA and Canada. Contact NWES for more information.

     
 

[ Previous Page / 1 / Next Page ]

Click On Images To Enlarge

This website is created and hosted by Website.com's Site Builder.